Search Results

MG-250-CS 250 MG-250-CS Cold saw machine for steel Manual Cold saw machine for cutting of Iron and steel. 45º angle cutting left /rigth Reduction box with three phase or single phase 1.50 Hp Worm gearbox Characteristics: - CE normatives. - Coolant pump. - Blur free vice. - Blade cover. - Emergency stop - Stand. - 250 mm HSS blade with 32 mm shaft OPTIONS: PACKAGING & DIMENSIONS: 830x555x1750 mm (165 Kg) MG250CS MG250CS 1/1 BLADE DIMENSIONS 250 mm diam. MOTOR 1/1.5 HP CUTTING SPEEDS 40 - 80 mt/min WORKING HEIGHT 955 mm COOLANT PUMP 0,16 HP CUTTING NOISE LEVEL 70 dB VICE OPENING 95mm Round cutting capacity 90º 80 mm Rectangular cutting capacity 90º 90X50 mm Square cutting capacity 90º 70X70 mm Round cutting capacity 45º derecha 80 mm Rectangular cutting capacity 45º derecha 60x60 mm Square cutting capacity 45º derecha 60x60 mm Round cutting capacity 45º izquierda 80 mm Rectangular cutting capacity 45º izquierda 60X60 mm Square cutting capacity 45º izquierda 60X60 mm CATALOGUE DATASHEET QUOTATION

BMSY-1515-C BMSY-1110-C Semiautomatic bandsaw machine - High-capacity bandsaw for work on large tubes Characteristics: - Arch guiding by two columns of treated and milled steel. - Solid and strong construction with overdimensioned frame. - Arch movement operated by hydraulic cylinder. - Progressive hydraulic advance. - Belt guiding with bearings and hard metal plates. - Cleaning brush for metal shaving on the belt. - Hydraulic clamp tightening. - Belt speed with electronic variator without stepping 20 to 100m/min. - Automatic arch elevation after the cutting with adjustable end stop. - Emergency stop. - CE security rules. - Hydraulic oil and bimetallic belt included. -Speed variator -Hydraulic vice - Hydraulic belt tensioning - Cutting pressure sensor - Chips extravtor 0.25 kW - Chips cleaning brush 0.25 Hp OPTIONS: PACKAGE & DIMENSIONS: 6000x2400x3850 mm (21645 Kg) 13300x 80x 1,6 BMSY1515C BMSY1515C 1/1 CATALOGUE DATASHEET QUOTATION Belt dimensions 13300x80x1,6 mm Motor 20 HP Cutting speeds 10 - 70 mt/min Working height 545 mm Coolant pump 2 X 0,27 HP Noise level Round cutting capacity 90º 1500 mm Rectangular cutting capacity 90º 1510X1500 mm Square cutting capacity 90º 1500X1500 mm Round cutting capacity 45º right Rectangular cutting capacity 45º right Square cutting capacity 45º right Round cutting capacity 60º right Rectangular cutting capacity 60º right Square cutting capacity 60º right

K-300/2-M BH 2750 x 27 x 0,9 K-300/2-M BH Semiautomatic bandsaw machine with arch controlled movement Robust belt-saw to cut iron and steel with a base of welded plates and aluminium saw arm. Hydraulic Cylinder that controls the arm. Openning and Closure of the clamping device are manual operated Caracteristics: - CE Norms Appliance - Cooling system - 2 Cutting Speeds - Manual tensioning band with manometer - Band guiding by means of carbide plates and Bearings - Clamping device max. Openning : 310mm - Cutting angle to 60º OPTIONS : PACKAGING & DIMENSIONS: 1400X750X1450 mm (340 Kg) Wooden crate K3002MBH 2 K3002MBH 2 1/1 Belt dimensions 2750x27x0,9 mm Motor 0.5 / 1.2 HP Cuttting speeds 35/70 mt/min Working height 990 mm Coolant pump 0,16 Hp Sound level 70 db Round cutting capacity 90º 240 mm Rectangular cutting capacity 90º 300X230 mm Square cutting capacity 90º 220X220 mm Round cutting capacity 45º right 200 mm Rectangular cutting capacity 45º right 220x190 mm Square cutting capacity 45º right 190X190 mm Round cutting capacity 60º right 110 mm Rectangular cutting capacity 60º right 110x140 mm Square cutting capacity 60º right 100X100 mm CATALOGUE DATASHEET QUOTATION

SINGLE BLADE SAW TL-302-M AUTOMATIC MITER SAW AUTOMATIC SAW AUTOMATIC CUTTING & DRILLING DOUBLE MITER SAW MACHINING CENTERS COPY ROUTERS END MILLING MACHINES PRESSES VACUUM CLEANERS POSITIONING SYSTEMS CRIMPING MACHINES ASSEMBLY TABLES TROLLEYS

P-3300 G P-3300 G 3,3 Tn pneumatic punching machine for aluminum profiles Pneumatic press ideally produced to perform punching on aluminium profiles and focused on windows and doors openings on the profile for the hardware to assemble the windows. Pneumatic press with steel structure Working force 3300 kgs at 8 atm. Pneumatic cylinder with pneumatic working course 20-80 mm. Speed of 35mm/seg. AVERAGE AIR CONSUM PRO CYCLE 35 litros DESK SIZE 375X230 mm DIAMETER OF THE CYLINDER 45 mm Pneumatic circuit discharge valve. Filter group with pressuremanometer Matrix grips on table OPTIONS : Turning stand PACKAGING AND DIMENSIONS: 500 x 500 x 830 (90 Kg) Wooden crate P3300 P3300 1/1 CATALOGUE DATASHEET QUOTATION

TAS-75 TAS-75 Beveling Polisher The TAS model belt polishers are efficient quality machines built in accordance with the strictest requirements regarding the environment and safety. Features: The standard model is equipped with folding plane, eye protection, angle stop and engine safety switch with zero voltage trigger. The ideal machines for roughing and polishing optimal in all types of metals. OPTIONS: You can attach a chip extractor with its corresponding bag. PACKAGING AND DIMENSIONS: 1120x510 mm (85 Kg) Standard packaging TAS 75 TAS 75 1/1 Motor - 4.00 Hp Rear pulley - 225x75 mm Sanding plane - 570x75 mm Band - 2000x75 mm Band speed - 34 m / sec Working height - VARIABLE-475-1240 Dimensions - 1120x510 mm Weight - 85 kg Engine speed - 3000 rpm Front pulley - 200x75 mm CATALOGUE DATASHEET QUOTATON

WC67Y 200/3200 WC67Y 200/3200 Hydraulic press brake - Steel structure to give rigidity and stability, consolidated with special treatment against vibrations and temperature changes. - Anti-torsion bar. - Integrated hydraulic transmission system, equipped with several tanks. - Electrically adjustable rear stop with fine adjustment and digital display. - Mechanical adjustment of the tranche independently of the cylinder to allow the superior closing. - System of descending work of fixed table and mobile upper trancha. - Motorized penetration stop with Numeric Control that controls the 2 preselector stops of the rear stop and the vertical penetration stop with 99 programs and 20 cycles in each program. - Top with sliding fingers on high precision skates. - Bimanual control, with emergency stop. - Gooseneck on all models. OPTIONS: AKAS - SECURITY SYSTEM * DEPENDING ON STOCK, THE MACHINE CAN BE IN BLUE OR GRAY COLORS PACKAGING AND DIMENSIONS: 3300x1715x2765 mm (10900 Kg) Standard packaging 1/6 Folding force200 Tn Folding length3200 mm Distance between studs2550 mm Swan neck320 mm Carrera200 mm Descent speed70 mm / sec Working speed7.5 mm / sec Speed return60 mm / sec Board table distance435 mm / sec Motor20.00 Hp CATALOGUE DATASHEET QUOTATION

MB-1300-L MB-1300-L Manual folding machine MB-L types are machines for normal standard bends and because of the low upper row they are suitable for U-profiles. Complementary accessories: dolly, R 2.5 mm round ruler and hardware for table mounting. Optional: Manual stops for folder. OPTIONS: PACKAGING AND DIMENSIONS: 1560x510x1000 mm (108 Kg) Standard packaging MB1300L MB1300L 1/1 Working length 1350 mm Max elevation 28 mm Maximum angle folded 135 º Max opening sup arm 28 mm Max Sheet thickness (Iron) 1.20 mm Max Sheet thickness (Stainless steel) 0.6 mm Max Sheet thickness (Aluminum) 2.50 mm CATALOGUE DATASHEET QUOTATION

BMSY-810-C BMSY-810-C Sierra de cinta Semiautomática Description: Large capacity belt saw. Caracteristics: - Arch guiding by two columns of treated and milled steel. - Solid and strong construction with overdimensioned frame. - Arch movement operated by hydraulic cylinder. - Progressive hydraulic advance. - Belt guiding with bearings and hard metal plates. - Cleaning brush for metal shaving on the belt. - Hydraulic clamp tightening. - Belt speed with electronic variator without stepping 20 to 100m/min. - Automatic arch elevation after the cutting with adjustable end stop. - Models “G” turning desk for cuttings at 45º (with this you don’t move the material while cutting) - 1m. material entrance desk, with rollers. - Emergency stop. - CE security rules. - Hydraulic oil and bimetallic belt included. OPTIONS : PACKAGING & DIMENSIONS: 3900X2350X1200 mm (3200 Kg) 8200 x 41 x 1,3 BMSY810C BMSY810C 1/1 Belt dimensions 8200x41x1,3 mm Motor 5,5 HP Cutting speeds 20 - 100 mt/min Working height 585 mm Coolant pump 0,16 Hp Sound level 70 db Round cutting capacity 90º 810 mm Rectangular cutting capacity 90º 810X850 mm Square cutting capacity 90º 810X810 mm CATALOGUE DATASHEET QUOTATION

MINIRAFRE-SA MINI RAFRE-SA Aluminium/PVC corner milling machine Manual machine for the grooving of any kind of aluminium carpentry, heads machining, hinges and lock housing, shutters, etc. Milling Blade 120 mm diam 2,75 HP Motor 3000 rpm 27 mm motor shaft axis diameter 32 mm interior milling blade 120 mm maximum drilling tool diameter 200 mm course movement 1x pneumatic clamping Adjustable backfence to increase milling capacity Automatic Lubrification OPTIONS: Base PACKAGING & DIMENSIONS: 410 X 400 X 330 (48 Kg) Wooden crate MINI RAFRE ZOOM 1/4 CATALOGUE DATASHEET QUOTATION