K-300-AA
K-300-AA Automatic band saw
- Bandsaw specially designed to cut tubes, profiles and sections of all types of ferrous materials and light alloys, with automatic feeding of bars and execution of the cut in automatic and manual.
Features:
- Hydraulic oil and bimetal tape included.
- Solid and robust construction with oversized frame.
- Movement of the arch through oleopneumatic unit with skip-stop valve with advance regulator in panel
- Advance feeder with oleopneumatic unit with built-in feed regulator.
- Guided tape with bearings and hard metal plates.
- Tighten the jaw pneumatic.
- 2 cutting speeds 35-70 mt / m. .
- Automatic lifting of the arch after the cut with adjustable limit switch.
- Working height 820 mm.
- Emergency stop.
- EC safety regulations.
OPTIONS:
Motorized stops for heavy loads-
Inputs for heavy loads
PACKAGING AND DIMENSIONS:
2200X2100X1900 mm (660 Kg)
Standard packaging
2750 x 27x 0,9
Dimensions of tape 2750x27x0.9 mm
Motor 0.5 / 1.2 HP
Cutting speeds 35 - 70 mt / min
Working height 820 mm
0.16 HP taladrin pump
Acoustic 70 dB
Feeding capacity of the feeder 600 Kg
Feeder 480 / (double feed) 980 mm
Cutting capacity round 90º 240 mm
Rectangular cutting capacity 90º 300X230 mm
Square cutting capacity 90º 220X220 mm
Cutting capacity round 45º right 200 mm
Rectangular cutting capacity 45º right 220x190 mm
Square cutting capacity 45º right 190x190 mm
Cutting capacity round 60º right 110 mm
Rectangular cutting capacity 60º right 110 x140 mm Cutting capacity square 60º right 100x100 mm
